Size, DPI and pixel dimensions
Physical presets are converted at 300 DPI and rounded to whole pixels: 2×3 cm is 236×354 px, 3×4 cm is 354×472 px, 4×6 cm is 472×709 px, and 2×2 in is 600×600 px.
The result panel always shows the exact pixels exported. Physical presets also write a JFIF density of 300 DPI into the JPG. Custom pixel sizes are labelled “Exact pixels” and do not claim a print resolution.
If the form gives pixels instead of centimetres, choose Custom and switch the unit to px. Some agencies ask for 600 DPI; this tool uses 300 DPI, so read the instructions instead of assuming that a common preset is accepted.
- 2×3 cm → 236×354 px at 300 DPI.
- 3×4 cm → 354×472 px at 300 DPI.
- 4×6 cm → 472×709 px at 300 DPI.
- 2×2 in → 600×600 px at 300 DPI.
A portrait that is easier to accept
Use a recent, sharp, front-facing photo with even light and a plain background. Keep the whole head and the top of the shoulders in frame, leave a little space above the head, and avoid heavy filters, extreme angles or a crop that cuts the chin.
Agency rules for glasses, head coverings, jewellery, makeup and background colour differ. Follow the form's instructions. KlikTools applies the size, crop and file limit; it does not certify a photo for a government, school or employer.
- Avoid a photo that is blurry, underexposed, heavily filtered or taken from a low angle.
- Keep the face centred and look toward the camera with a neutral expression.
- Check whether the form requires a white, blue, red or plain background before you crop.
- Do not digitally alter identity documents or remove facial features.
Meeting a 100–500 KB limit
The JPG encoder starts at quality 0.95 and searches downward to a floor of 0.50 to find the highest quality that fits the selected limit. The download unlocks only when the encoded file is at or below the limit shown.
A tight limit may be incompatible with a large physical size. If the result cannot fit at usable quality, raise the limit or choose a smaller photo size. The tool never pretends that an oversized file is ready and never changes the claimed DPI to make a file look smaller.
A 100 KB limit is usually easier with 2×3 cm than with 4×6 cm. The actual byte count and pixel dimensions are shown in the result card before you download.
Crop, rotate and orientation
Drag the photo to move it, use the wheel or a two-finger pinch to zoom, and use the slider or the +/− buttons for fine control. The arrow keys nudge the crop when the crop area has focus; [ and ] rotate by 90 degrees; Shift plus an arrow moves faster.
The crop stage is the final frame. What you see inside the frame is what is drawn into the exported JPG, with a white background where the photo does not cover the frame. The thumbnail in the result card reflects the same crop.
The browser handles EXIF orientation when it decodes the photo, so a portrait photo from a phone is not silently rotated sideways. The output is a new JPG; the original is never modified.
Privacy, drafts and file handling
Decoding, cropping and JPEG encoding happen in this tab. There is no upload step for the photo. Replacing a file or leaving the editor releases the browser object URLs used for previews; closing the tab clears the working copy.
If you switch language while a photo is loaded, KlikTools stores the file and crop settings in IndexedDB just long enough to restore them on the paired page. The draft expires after 30 minutes and is removed after a successful restore, when you remove the photo, or when you start over.
What size is a 3×4 cm photo in pixels?
At 300 DPI, a 3×4 cm photo is 354×472 px. The tool shows the exact pixel size for every preset before you download.
Can I use a photo from my phone?
Yes. Use a recent, sharp, front-facing photo with even light. JPG, PNG and WebP are accepted up to 25 MB.
Why is my 100 KB export failing?
The dimensions and the file limit may be incompatible. Raise the limit or choose a smaller photo size; the tool never labels a file ready unless it meets the limit.
Does KlikTools upload my photo?
No. The image is decoded, cropped and encoded in your browser. There is no upload step for the photo.
What DPI should I choose?
300 DPI is a common choice for printed ID photos, and the physical presets here use 300 DPI. Some agencies ask for 600 DPI or give exact pixel dimensions instead. If the form gives pixels, use Custom with the px unit; if it demands 600 DPI, check the agency's rules before using a 300 DPI preset.
Can I wear glasses or a head covering in the photo?
Rules vary by agency. Follow the form. In general, avoid glare on lenses, keep your eyes visible, and do not remove religious or cultural headwear digitally. KlikTools cannot tell you whether a photo will be accepted; it only applies the size, crop and limit.
Why is the download still locked at 100 KB?
The selected dimensions and the limit may be incompatible at usable JPEG quality. The encoder stops at quality 0.50; if the file still exceeds the limit, raise the limit or choose a smaller photo size. The tool never marks an oversized file ready or changes the DPI claim to hide it.
Can I use a PNG or WebP portrait?
Yes. JPG, PNG and WebP are accepted up to 25 MB. The export is always JPG, so transparent areas become white. The original file on your device is not modified.